CNC Wood Router
Details:
Auto Tool Changer Wood CNC Router ATC1325
Characteristic
Cutting on Iron Plate, Aluminum sheet, Galvanized Sheet, Stainless,Titanium plates etc.
Applicable industries:
1.Water cooling spindle,high precision,long life time,steady working,easy to start up.
2.thicken square pipe stucture ,well welded, no distortion for whole structure high precision ,and long life time.
3.DSP controller system with USB interface,working without connecting with computer during working and easy to control.
4.Software:CAD/CAM designing software such as type3/artcam/castmate/weitai etc.
5.auto oilling system ,easy to operate by pressing one key.
6.seperated control system makes operation easily.
7.Adopt high speed stepper motor and drivers,and two motors for Y axis.max speed is 25mm/min.
8.The vacuum table holds tightly the carving materials which makes operating more reliable and convenient.
|
Main Configurations |
|||
|
Working area |
1300*2500*200mm |
Spindle |
3.5kw air cooling |
|
Control system |
Nc studio |
Software |
Artcam |
|
Stepper motor |
450B |
Leadshine driver |
M860H |
|
Transmission |
X,Y axis helical gear transmission, Z by Taiwan TBI ball screw |
Rail guide |
Taiwan Hiwin liner square rail |
|
Soft limited switch |
Hard limited switch |
Table |
T-Slot / Vacuum |
|
Inverter |
Best inverter |
Frame |
Welded and heavy duty frame |
|
Tool sensor, filter, cast steel motor box |
New type design for the high stability |
Taiwan imported best bearing holder |
Lubrication system |
|
Specifications |
|||
|
X,Y,Z working area |
1300*2500*200mm |
X,Y,Z traveling positioning accuracy |
±0.01/100mm |
|
X,Y,Z repositioning accuracy |
±0.01mm |
Table surface |
T-Slot / Vacuum |
|
Frame |
Cast steel |
X,Y,Z structure |
X,Y: Taiwan rack pinion and gear transmission Z: Taiwan TBI 3205 ball screw |
|
Max rapid travel rate |
30m/min |
Max working speed |
20m/min |
|
Spindle power motor |
3.5kw air cooling spindle |
Spindle speed |
0-24000rmp/min |
|
Drive motors |
Leadshine stepper system |
Working voltage |
AC380V, 3 phase/AC220V single phase |
|
Command language |
G code |
Operating system |
Nc studio |
|
Interface |
USB |
Flash memory |
128M ( U disk ) |
|
X,Y resolution |
<0.01mm |
Software compatibility |
Artcam software |
|
Running environment |
Temperature: 0°C-45°C Relative humidity: 30%-75% |
Package size |
2380x3680x1800mm |
